Electromec Engineering

L7P

L7P

The LS Electric L7P servo drive is a motion control drive with an Indexer Function Type for precise speed and position control of servo motors. It supports multiple control modes and feedback options, and the Indexer Function Type enables easy programming of motion profiles through simple commands. This makes it a flexible and versatile solution for a range of industrial applications, including robotics, CNC machining, and automated assembly systems.

Category:






Features

  • Provides a built-in program function for single axis position determination module
  • Supports position control mode by pulse input
  • Position control mode
  • Possible to use without upper controller
  • Modbus RTU Protocol (RS-422)
  • Supports various motor and encoder drives
  • Supports Rotary, DD, and motor drive (supporting 3rd party motors)
  • Quadrature, BiSS-C, Tamagawa serial abs, EnDat 2.2, Resolver
  • Improved Control Performance
  • Improved Control bandwidth
  • Providing 4-step Notch-Filter
  • Vibration control by Real-time FET
  • Real-time gain tuning function

Specification

L7NHA

Item \ Type Name L7NHA001U L7NHA002U L7NHA004U L7NHA008U L7NHA010U L7NHA020U L7NHA035U L7NHA050U L7NHA075U L7NHA150U
Input Power Main Power Supply 3 Phase AC200 ~ 230[V](-15 ~ +10[%]), 50 ~ 60[Hz]
Control Power Supply Single Phase AC200 ~ 230[V](-15 ~ +10[%]), 50 ~ 60[Hz]
Rated Current[A] 1.4 1.7 3 5.2 6.75 13.5 16.7 32 39.4 76
Peak Current[A] 4.2 5.1 9 15.6 20.25 40.5 50.1 90.88 98.5 190
Encoder Type Quadrature(Incremental)
BiSS-B, BiSS-C(Absolute, Incremental) Tamagawa Serial(Absolute, Incremental) EnDat 2.2
Sinusoidal Analog Hall
Control Performance Speed Control Range Maximum 1: 5000
Frequency Response Maximum 1[kHz] or above(When the 19-bit Serial Encoder is applied)
Speed Variation Ratio ±0.01[%] or lower(When the load changes between 0 and 100%)
±0.1[%] or less(Temperature of 25°C[±10]
Torque Control Repetition Accuracy Within ±1%
EtherCAT Communication Specifications Communication Standard FoE (Firmware download)
EoE (Parameter setting by UDP, Tuning, Secondary function, Parameter copy) CoE (IEC 61158 Type12, IEC 61800-7 CIA 402 Drive profile)
Physical Layer 100BASE-TX(IEEE802.3)
Connector RJ45 x 2
Communication distance Within connection between nodes 100[m]
DC(Distributed Clock) By DC mode synchronism. minimum DC cycle: 250[us]
LED Display LinkAct IN, LinkAct OUT, RUN, ERR
Cia402 Drive Profile Profile Position Mode Profile Velocity Mode Profile Torque Mode
Cyclic Synchronous Position Mode Cyclic Synchronous Velocity Mode Cyclic Synchronous Torque Mode Homing Mode
Digital Input / Output Digital Input Input Voltage range : DC 12[V] ~ DC 24[V] Total 8 input channels(allocable)
Above 12 functions can be used selectively for assignment.
(*POT, *NOT, *HOME, *STOP, *PCON, *GAIN2, *P_CL, *N_CL, PROBE1, PROBE2, EMG, A_RST)
Digital Output Service rating: DC 24[V] ±10%, 120[   ] Total 4 input channels (allocable)
Above 11 functions can be used selectively for assignment.
(*BRAKE±, *ALARM±, *READY±, *ZSPD±, INPOS±, TLMT±, VLMT±, INSPD±, WARN±, TGON±, INPOS±)
Safety Function 2 Input Channels (STO1, STO2), 1 Output Channels (EDM±)
USB Communication Function Firmware download, Parameter setting, Tuning, Secondary function, Parameter cop>
Communication Standard USB 2.0 Full Speed (applies standard)
Connect PC or USB storing medium
Internal Function Dynamic Braking Standard built-in brake (activated when the servo alarm goes off or when the servo is off).
Regenerative Braking Default built-in(excluding 15kW), external installation possible
Display Function 7 segments(5DIGIT)
Self-setting Function The [MODE] key changes the content displayed in 7 segments
Additional Function Auto gain tuning function
Protection Function Overcurrent, overload, overvoltage, insufficient voltage, main power input problem, control power input problem, overspeed, motor cable, overheat(power module overheat, abnormal drive operation’s temp), encoder problem, over-regenerative, sensor problem, communication problem
Operation Operating Temperature / Storage Temperature 0 ~ 50[°C] / -20 ~ 70[°C]
Operating Humidity / Storage Humidity Below 80[%]RH / Below 90[%]RH(avoid dew-condensation)
Environment Indoor, Avoid corrosive, inflammable gas or liquid, and electrically conductive dust.

L7NHB

Item \ Type Name L7NHB010U L7NHB020U L7NHB035U L7NHB050U L7NHB075U L7NHB150U
Input Power Main Power Supply 3 Phase AC380 ~480[V](-15 ~ +10[%]), 50 ~ 60[Hz]
Control Power Supply Single Phase AC380 ~ 480[V](-15 ~ +10[%]), 50 ~ 60[Hz]
Rated Current[A] 3.7 8 10.1 17.5 22.8 39
Peak Current[A] 11.1 24 30.3 47.25 57 97.5
Encoder Type Quadrature(Incremental)
BiSS-B, BiSS-C(Absolute, Incremental) Tamagawa Serial(Absolute, Incremental) EnDat 2.2
Sinusoidal Analog Hall
Control Performance Speed Control Range Maximum 1: 5000
Frequency Response Maximum 1[kHz] or above(When the 19-bit Serial Encoder is applied)
Speed Variation Ratio ±0.01[%] or lower(When the load changes between 0 and 100%)
±0.1[%] or less(Temperature of 25°C[±10]
Torque Control Repetition Accuracy Within ±1%
EtherCAT Communication Specifications Communication Standard FoE (Firmware download)
EoE (Parameter setting by UDP, Tuning, Secondary function, Parameter copy) CoE (IEC 61158 Type12, IEC 61800-7 CIA 402 Drive profile)
Physical Layer 100BASE-TX(IEEE802.3)
Connector RJ45 x 2
Communication distance Within connection between nodes 100[m]
DC(Distributed Clock) By DC mode synchronism. minimum DC cycle: 250[us]
LED Display LinkAct IN, LinkAct OUT, RUN, ERR
Cia402 Drive Profile Profile Position Mode Profile Velocity Mode Profile Torque Mode
Cyclic Synchronous Position Mode Cyclic Synchronous Velocity Mode Cyclic Synchronous Torque Mode Homing Mode
Digital Input / Output Digital Input Input Voltage range : DC 12[V] ~ DC 24[V] Total 8 input channels(allocable)
Above 12 functions can be used selectively for assignment.
(*POT, *NOT, *HOME, *STOP, *PCON, *GAIN2, *P_CL, *N_CL, PROBE1, PROBE2, EMG, A_RST)
Digital Output Service rating: DC 24[V] ±10%, 120[   ] Total 4input channels (allocable)
Above 11 functions can be used selectively for assignment.
(*BRAKE±, *ALARM±, *READY±, *ZSPD±, INPOS±, TLMT±, VLMT±, INSPD±, WARN±, TGON±, INPOS±)
Safety Function 2 Input Channels (STO1, STO2), 1 Output Channels (EDM±)
USB Communication Function Firmware download, Parameter setting, Tuning, Secondary function, Parameter copy
Communication Standard USB 2.0 Full Speed (applies standard)
Connect PC or USB storing medium
Internal Function Dynamic Braking Standard built-in brake (activated when the servo alarm goes off or when the servo is off).
Regenerative Braking Default built-in(excluding 15kW), external installation possible
Display Function 7 segments(5DIGIT)
Self-setting Function The [MODE] key changes the content displayed in 7 segments
Additional Function Auto gain tuning function
Protection Function Overcurrent, overload, overvoltage, insufficient voltage, main power input problem, control power input problem, overspeed, motor cable, overheat(power module overheat, abnormal drive operation’s temp), encoder problem, over-regenerative, sensor problem, communication problem
Operation Operating Temperature / Storage Temperature 0 ~ 50[°C] / -20 ~ 70[°C]
Operating Humidity / Storage Humidity Below 80[%]RH / Below 90[%]RH(avoid dew-condensation)
Environment Indoor, Avoid corrosive, inflammable gas or liquid, and electrically conductive dust.


Reviews

There are no reviews yet.

Be the first to review “L7P”

Your email address will not be published. Required fields are marked *

Scroll to Top
0